Below is the media type supported by the machine. Make sure the paper or media type you are printing on is within specification. If problem continues, continue to next step.Ĩ. NOTE: The gray levers should only be in Envelope position if you are printing envelopes.ħ. Verify that the gray levers on the back of the machine are in Position A. ![]() NOTE: When removing stuck paper from in between fuser rollers be careful as the area or the rollers might be extremely hot if the machine has just been recently used.Ħ. ![]() If you find a paper stuck, very carefully remove it. Check in between the two fuser roller and see if you see any paper stuck. If there is no damage to the fuser roller, continue to STEP 4.Ĥ. If there is damage to the fuser roller, go to STEP 5. Check in between the two fuser rollers and see if you see any damage to the rollers. ![]() Pull the green tabs at the left and right sides toward you and fold down the fuser cover.ģ. Wait for the machine to cool down before you touch the internal parts of the machine.Ģ. NOTE: After you have just used the machine, some internal parts of the machine will be extremely hot.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |